HPAVC

home *** CD-ROM | disk | FTP | other *** search

/ HPAVC / HPAVC CD-ROM.iso / PFED-105.ZIP / REVISION.HST < prev next >

Wrap

Text File | 1996-04-08 | 95KB | 1,353 lines

┌─────────────────────────────────┐ │░ REVISION HISTORY ░░░░░░░░░░░░░░│ └─────────────────────────────────┘ I know i didn't fix some bugs, my BBS went down and i lost all my mail so i fixed what i could remember or you most recently reported. Most bugs aren't really bugs but lack of memory problems or running under new operating systems like Windows 95. 04/08/96 - v1.05 ~~~~~~~~~~~~~~~~ ■- Have seen a couple DIZ Makers lately and I liked the idea so have added it to PFED. Tag all disks in a set and press ALT+A. You will be prompted for program name, release date, and # of disks in the release. You can customize the output using a macro text file 'FILE_ID.DAT'. You can use 4 different macros and add your group or company logo to this file. The PFED DIZ-maker also inserts the new FILE_ID.DIZ into the tagged file(s). Example: |NM[29] DiSK [|CD of |TD] - Logo goes here - RELEASE [|DT] DIZ-maker macros: |NM - Program name |CD - Current disk |DT - Release date |TD - Total # disks ■- Also fixed some bugs with adding FILE_ID.DIZ using the description: 1) If using Add DIZ to archive 'CTRL+A' and the archive had a file_id.diz and FILE_ID.DIZ it would cause PFED to lock up - Fixed (SkyGod) 2) It also now won't attempt to add a DIZ to an offline file. (Steve Dowd) 3) It now prompts 'Add DIZ using description' Yes/No before proceeding. - When NUKING files or giving credit and the user's bytes were greater than 2,147,483,647 bytes PFED would erase # - Fixed. (Capt. Caveman) - When NUKING files and entering the Nuke Factor, enter = 1. (Like it says) - Couldn't insert a new area before the PCB upload directory - Fixed. - When adopting files sometimes long descs symbol '' wasn't displayed. ■- Added pull-down menu to the file area menu. Use '/' or left/right cursor arrows to access. Requires AREAMENU.DAT to be in the PFED dir. 02/09/96 - v1.04 ~~~~~~~~~~~~~~~~ ■- Added Pull-down menus for the file directory. Use '/' or left/right cursor arrows to access. Helps since there's over 60 commands and I can't remember half of them. Helps remote co-sysops too. Make sure to extract new 'DIRMENU.DAT' file. - Added <T>ouch tagged file dates. This changes the actual file date to the date uploaded. Also <ALT+D> change upload dates changes all tagged files to the date entered. (Enter=Today's date) It will also 'touch' the actual file dates if desired. Make sure to extract new BOOMDOS.EXE. - After a lockup, power loss, etc... If you used existing index files sometimes old deleted or moved files would reappear - Fixed. (Iron Steal) - If you deleted files inside the file viewer it would update filesize but it wouldn't automatically save the DIR when exiting - Fixed. (Me) - If using F-Prot to get virus names (ALT+V) it now scans all files. (Falcon) ■- BOOMLAB v.71 - MAJOR BUG: Any file to be zapped that contained a path error BOOMLAB out with a Error #5 - Fixed. (Fiat) - If there was a blank line in the Random BBS Ad text file it would cause any text file in the archive to be deleted - Fixed, now must contain a minimum of 3 characters. (Fiat) - 'List of files NEVER to be ZAPPED' now supports wildcards. (Aeon&Flux) 12/28/95 - v1.03 ~~~~~~~~~~~~~~~~ ■- Setup now has a main menu so you don't have to go through each section to change what you want to change. ■- Added new key for tagged files in the file directory. <ALT+R> renames all tagged filenames to the CD-ROM ISO naming convention. Examples: PFED-1.ZIP = PFED_1.ZIP $PFED!.ZIP to PFED.ZIP (SkyGod) - <ALT+F> renames ALL filenames in DIR to CD-ROM naming convention. ■- BOOMLAB BUG: Sometimes files contained in paths were deleted that were not found in the ZAP FILES list-Fixed. (Aeon&Flux) 11/28/95 - v1.02 - minor update ~~~~~~~~~~~~~~~~ ■- Added support for the new Tri-BBS v10.0. (Jim Scialdone) ■- BSETUP.EXE was merged into PSETUP.EXE just to get the PFED_.ZIP smaller. - Added a new option in PSETUP: 'Allow FAT files moves'. So if the FAT moves were messing up your FAT table you can now turn them off. ■- BOOMLAB v.70 - If a FILE_ID.DIZ is in a path inside the archive it will now use it if there is no FILE_ID.DIZ in the main dir. (Stratocaster) - If BOOMLAB has to move a file (to bad path or using move option with LOCAL switch) it will now check if it was moved ok before deleting source file. - F-Prot scan all files switch was corrected to /ALL from /A. (Falcon) 10/18/95 - v1.01 ~~~~~~~~~~~~~~~~ ■- If you re-processed a file in PFED that had no FILE_ID.DIZ it would leave only the first line of the old description. The problem was i didn't want duplicate archive stats, uploader name, passed by text, and uploaded by text. And i figured that the uploader would of only left a 1 line desc. Got too many complaints so now the previous description will remain intact and any lines added will be checked to see if it's already there, BUT sometimes you'll get uploader name or stats twice if theres no DIZ. ■- DUPE CHECKER & MASTER LIST prompts for what conferences/areas to process. ■- BUG: Didn't show rez's for a lot of JPG's - Fixed ■- BOOMLAB v.69a - Added 4 GIF/JPG macros: |GI = Type/Version, |GW = Width, |GH = Height, |GC = # colors. Can be used with the new 'Add GIF/JPG info to desc' macro file (Bsetup pg #4) to add the type & resolution to desc. Ex: |gi - [|gwX|ghX|gc] Adds: GIF v.89a - [320X200X256] - Added more space to define 'Uploaded by' string. (J. Lowrey) - If 'Replace DIZ if stripped' is enabled and only blank lines are stripped the DIZ will not be replaced. ■- BOOMLAB v.69 - Added option 'Add a DIZ if none found' (BSetup Pg #2) If enabled a FILE_ID.DIZ will be created using the uploader's file description and it will be inserted into the archive. - BUG: When uncompressed files are compressed only the 1st description line was kept - Fixed. (Doyen/Keith Winter) - BUG: If using 'Framing' option and file was not a archive or didn't have a FILE_ID.DIZ it wasn't framed. Now uses uploader's description. (J. Lowrey) - If uploading files locally from inside PCBoard then LOCAL options will apply such as 'Dupe Check Local UL's' and 'Add Uploader to Local UL'. (v1.001 - 10/04/95) ■- ALT+M from any screen changes the graphics mode (25,43, or 50 lines) ■- Added <E>dit text file in archive viewer, requires external text editor in setup. Will prompt whether to replace edited file back into archive. ■- If using Nuker/Bonus/Warning system you can now Abort with <Esc>, it also now won't let you enter negative #'s for nuke/bonus factor. (Bug Lord) Also now won't write mail if uploader is not not known. (Capt. Caveman) ■- BUG: Clone file descriptions 'K' & 'CTRL+K' didn't work - Fixed. BUG: Scanning for files didn't support PCB's ..\ dirs -Fixed (Wildchild) BUG: If using previous index files it didn't write new DIR when exiting. BUG: Under some circumstances uploader name & archive info wasn't added to file description when processing <A>ll - Fixed. (Madman Trapper) 09/22/95 - v1.00 ~~~~~~~~~~~~~~~~ ■- In the past if PFED errored out or you lost power or something you would lose all the editing you had done in a DIR. PFED will now check if the previous index files exist and ask if you wish to use them. ■- '=' key adds GIF and now adds JFIF/JPEG (.JPG) resolution to the description, minus colors if JPG. Ex: [640x480] (Jorg Pitts) - Added 'Y' key, it uses DOS's COMP (Compare) to compare highlighted file to a specified file. I use it to compare virus files to eliminate dupes. ■- PFEDMAIL v.02 - Added support if you use '../' for paths. (WildChild) Added better error detection, so if doesn't run you at least it tells why. Can now <E>nter a simple message from the PFEDMAIL main menu. ■- BUG: <+> importing files had some display bugs - Fixed. - BUG: Help displayed in 25 line mode even if PFED was in 43 or 50 line mode. - BUG: Fixed some BOOMLAB display bugs dealing with ZAPPING bbs ads. - BUG: BOOMLAB would Fatal Error #5 when processing a .COM over 50K -Fixed. - Took out /OLD swith for F-PROT, registered version won't accept it. (Fiat) - Added BBS BOOMLAB support for TBWEEDER. TBWEEDER is used by virus BBS's to eliminate duplicate .EXE & .COM files that have been renamed. If a dupe is uploaded it will be deleted and no credit given. (Falcon) - Added support for AVPLite v2.2 virus scanner, uses a lot less memory than regular AVP. Should now be able to use it from PFED. (Falcon) (v.992 - 09/12/95) - MAJOR BUG: If after using the <C>opy command you use the <D>elete command PFED deleted all files tagged PLUS any files copied! - Fixed. - Editing Descriptions: Added partial line wrap-around using <Delete> key. - Added <A> in DOS viewer, it adds tagged files to a specified archive. Format determined by file extension. ARJ/LZH/RAR or ZIP (Default=.ZIP) - When ncompressing files to diskette, PFED asks 'ERASE any files on disk' - BUG: File viewer couldn't delete files w/o extensions - Fixed. - BUG: PFEDMAIL.EXE sometimes didn't work when reading CNAMES.@@@-Fixed? ■- BOOMLAB v.68 - Added a setup option (Pg #4) to set 'Path to LOG files'. - Added 'ZAP filenames containing Hi-bit chars (Pg #1) If enabled any file containing hi-bit ASC characters in their filenames will be deleted. - Included a new display file for showing progress to user: PCBUSER2.ANS It uses 2 new macros |PM (Progress meter) & |PP (%) to show progress. Define which display file you wish to use on Page #4 of BOOMLAB setup. ┌─────────────────────────────────────┐ │ BOOMLAB v0.68 testing: BLAB_068.ZIP │ PCBUSER2.ANS │ ■ Virus Scanning using McAfee │ w/meter │ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓■■■■■■■■■■ 60% │ └─────────────────────────────────────┘ - Improved the way display progress files work. It now reads the macro file displays it once then only updates anything following a 'LOOP_' each time. LOOP_5H|bm[34] - BOOMLAB now checks integrity of TeleDisk .TD0 files. Requires TDCHECK.EXE. - BUG: BOOMLAB would try ZIPing a file if it had no extension. (Keith Winter) - PROBLEM: If a virus name started with "POSSIBLY A VARIANT OF ","DAMAGED ", "SEEMS TO BE A ", or "DROPPER OF " it wasn't displayed - Fixed. (Falcon) (v.991 - 08/26/95) ■- BUG: If no reg key was found, BOOMLAB would error at some point - Fixed. - BUG: If using smart-shrink desc , it displayed desc of next file - Fixed. ■- BOOMLAB v.67 - PKZIP will try and use the Novell Netware server CPU when possible, which can cause files to be corrupted or doubles their size. Added option to disable use of server CPU on page #4 of BSETUP. (Bionic) - Can age test by percentage, if a % files are older than age check, then the file will fail. Enter in the format %75 or %50. (Iron Steal) 08/23/95 v0.99 ~~~~~~~~~~~~~~ ■- Added PFEDMAIL v.01 utility. It is used to send PcBoard E-Mail directly from PFED concerning NUKED files or giving BONUS CREDIT/WARNINGS. Enable it on page #2 of PSETUP, also enter the conference # where mail should be left. Mail macro files NUKE.MSG, BONUS.MSG, & WARNING.MSG can be used to design your own mail. (see PFED.DOC under 'FILE E-MAIL' for details) - PFEDMAIL can also view mail for a highlighted conference with the key at the main conf menu. As of now it can only view/kill/edit header info. ■- Opening/Exit Screens have been replaced. The binary TheDraw screens i used was using caused problems with too many people. These should work 100%. - Added file directory key <ALT+D> which changes all tagged file dates to any date specified. (Phat Phreddy) - key from the main help menu prints docs without any @X codes. (Scufi) ■- BOOMLAB v.66 - You can now define different config files by adding it to the command line. Ex: BSETUP CONF1.CFG Name MUST include extension .CFG Then add the full path & filename to the config path in PCBTEST.BAT file. You can also use the following 2 macros on the command line so you can use different config files for conference or node file was uploaded to: @uc - Conference # file was uploaded to. @un - Node # file was uploaded to. Ex: BOOMLAB D:\PFED\CONF@UC.CFG UPLOAD %2 %1 %3 D:\PCB ^^^^^^^^^^^ - Added a new BOOMLAB macro |uc = conference # file was upload to. - If a uploaded text file has a FILE_ID.DIZ description embedded in it (@BEGIN_FILE_ID.DIZ) BOOMLAB can now extract it. (Qube) - McAfee's SCAN uses DDA-Direct Disk Access, not allowed under Windows '95 so I've added a option to disable it on page #3 of BSETUP. (Dark Visage) (v983 - 08/14/95) - BUG: When NUKING files using 'same inputs for all' and restoring credit to downloaders, next file showed last downloader as uploader -Fixed(Babyvet) - BUG: When NUKING files sometimes bytes nuked wasn't correct -Fixed. - BUG: Graphics when doing <Z>ippy Scans was messed up - Fixed. - BUG: <O> key didn't restore file's date if previously offline - Fixed. - BUG: If moving ALL files from a DIR using Expert Move, PFED would error-out with 'ILLEGAL FUNCTION' - Fixed. (Jim Wilson) - Added support for AVP. (AntiVirus Toolkit PRO) Only works correctly if registered, may not work from PFED but will work if used from BOOMLAB. - PROBLEM: Couldn't scan non-archived files with Dr. Solomon -Fixed. (Falcon) - PROBLEM: If a virus name started with 'POSSIBLY A' or 'SEEMS TO BE AN' or 'THIS VIRUS IS LIKE' it wasn't displayed - Fixed. (Falcon) (v982 - 8/8/95) - PFED for TriBBS & BOOMER's Archive manager didn't work since v.96 -Fixed. - Added 2 setup options in PSETUP.EXE (PFED setup) 1.) Show colors when displaying full description. Displays PcBoard @X colors and if none found display's default BBS description colors. 2.) Turn Off 'Exit Area - Are You Sure' prompt when exiting DIR. - <F> key (Get File Creation Date) didn't work on local uploads - Fixed. - <G> key (Get DIZ Date) didn't work if file was NOT processed - Fixed. - <CTRL + S> sorts ZAPFILES list in archive viewer. - BOOMLAB now uses 5k less memory....well every little bit helps ;) (v981 - 8/1/95) ■ - MAJOR BUG: When adopting files and a file fails it would error-out with 'ILLEGAL FUNCTION CALL - Fixed. (Mr.Bill/Third Son) - Replace DIZ if stripped was case-sensitive - Fixed. 08/01/95 v0.98 ~~~~~~~~~~~~~~ ■ - BOOMLAB v.65 - Added new option: Replace DIZ in archive if stripped? If lines or text are removed from a DIZ this option will replace the DIZ in the archive with new stripped DIZ. - Fixed bug with external archive converter support: DIZ description became merged with user's description. Also if using the BOOMLAB 'LOCAL' switch it would delete the entire output (DIR) file. (Jim Wilson) - BOOMLAB cannot support Norton AntiVirus 3.0+, only v2.1 is supported. ■ - FRAMING FILE DESCRIPTIONS: This option re-writes the file description using an external macro file. Can be used to 'frame' or add box graphics to the description. If using this option make sure to enable 'smart' word-wrapping. A sample macro file 'BLUEBOX' is found in SAMPLES.ZIP. There are two ways to 'Frame' descriptions: @X1F╔══════════════════════════════════════════╗@X08 @X1F║ 7/5/95 Flash ROM code for This is the ║@X08█ @X1F║ official release of V.34+ for upgradable ║@X08█ @X1F║ This update adds 33.6k as a new top ║@X08█ @X1F║ speed! Flash program is DOS based. For ║@X08█ @X1F║ domestic US/Canada modems only. ║@X08█ @X1F╚══════════════════════════════════════════╝@X08█ @X08 ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ 1.) To 'Frame' ALL descriptions: Enter the path to the macro file in the BOOMLAB setup under 'FILE DESCRIPTIONS' (Pg #2). 2.) To 'Frame' selected descriptions: Tag files in a DIR and press <CTRL+F>. You will prompted to enter the name of the macro file. PKZIPFIX highlighted file was <CTRL+F> is now <CTRL+R>. ■ - Added FILE STATISTICS Report: Can be run from main conf menu using <F> key or by using command line option 'STATS'. It Generates a report with total # of files and Kbytes for each area, conf, and tapes. Report is output to the file 'FILESTAT.TXT' and 'FILESTAT.PCB' which includes PCB color codes so that it may be used as a online bulletin if desired. Subswitches can limit confs & areas to be checked. Ex: PFED STATS 1-3,5 ■ - Added 4 switches to limit remote access: Ex: PFED -r -ns -c 1-10 -C or 'CONFS' = Limits conference access to remote users to the conferences listed. Ex: PFED -c 0,1-3,10 (Robert Eagle) -NC or 'NOCFG' = No conference & area configuration editing. -ND or 'NODEL' = Remote users cannot delete or nuke files. -NS or 'NOSHELL' = Do NOT allow remote users access to DOS. Cannot run setup, use DOS Shells, or Shell to DOS. (Stratocaster) ■ - Added <C> key at DIR selection screen, it adds new file area, copying configuration from another selected area. - DOWNLOAD COUNTER now skips download if date/time of download was earlier than last time counter was run. - Line one of desc still was getting chopped off if it had graphics- Fixed. - Couldn't delete descriptions or do some other functions if file had been Nuked - Fixed. (Stratocaster) 07/23/95 v0.97 ■- ADDING TAPE & SET #'S - You can use your OFF-LINE file ~~~~~~~~~~~~~~ directories as a simple tape directory by adding tape & set #'s to the end of file descriptions. (See PFED.DOC) Adding Tape/Set Enable 'ADD TAPE/SET #'s WHEN MOVING FILES OFF-LINE' in #'s to descs then PFED General Setup (Pg #1) then when moving files to an offline directory PFED will prompt 'Input Tape #, Set #' and add the tape information to the end of the file desc when moving it. The offline directory must start with 'OFF' for PFED to recognize it as such. - You can manually add tape & set #'s for tagged files in a file directory using the <ALT + T> keys. ■- BOOMLAB v.64 - Lot of people where getting ERROR #75's. This was caused by the FILE_ID.DIZ from SCN_224E.ZIP It couldn't be deleted so following files errored out. 'ATTRIB +A -R' resets it - Fixed. (Qube/Stratocaster) ■- If archiver program wasn't found or couldn't run BOOMLAB exited with FATAL ERROR #53. BOOMLAB now reports why. - Added support for external archive converters. Internal External Archive converter doesn't support paths & only converts to ZIP's Converters so external converter may be desired. (See BOOMLAB.DOC) - Added macros |fp = file path, |ff = full path & filename. - After repack, archive not recognized by PCB v15.1+ -Fixed. - RAR formats can now be repacked to ZIP. (Mr. Fixit) ■- <J> from any menu now jumps to a selected conference. - Added <S>earch for text in help menus. - Increased max # areas in dupe checker from 100 => 500. (J. Benton) - Changed BS Stats screen if sysop is using PCB credits. (Boxcar) - Line 1 of desc didn't allow room for color codes - Fixed. - List all your CD-ROM drives in PSETUP so PFED won't check these for free space or try to delete dupes. (Mr.Bill) - Removed Operating System from PSETUP as it's obsolete. - SHRINK & SORT didn't work from command line -Fixed.(Skelem) ■- Added 'Smart-Shrink'. PFED will attempt to locate the line with program name when shrinking file descs. 'Smart-Shrink' To enable set question #10 in PSETUP to 'Y' if not enabled it will continue only to use 1st line. ■- BOOMLAB v.63 - Graphics for Failed file descriptions can External FAILED now be added from external file 'DESCFAIL.MSG'. All Descriptions macros supported. A sample can be found in SAMPLES.ZIP. - Added BSETUP option, 'Quit Scanning after virus detected' If using multiple scanners, 'Y' quits after any virus detected. 'N' runs all scanners. (See BOOMLAB.DOC) - Added 2 new macros for multiple scanners, |s# & |v#. |s1,|s2,|s3 etc - Program name & version for each scanner. |v1,|v2,|v3 ... - Virus Scan results for each scanner. - Added support for Norton AntiVirus. Tested with v2.1 - Large USERS file caused BOOMLAB to error #63 when trying to get PCBALIAS info - Fixed? (Old Gringo) - If virus detected and the name of virus not found BOOMLAB reported 'PASSED' now reports 'VIRUS INFECTED!' - Description files in paths caused problems, BOOMLAB now won't attempt to read any DIZ that is in a path. - Can now not only <S>trip MCI | pipe colors but <C>onvert them to PCBoard's @X color codes. (Phreak Creep) 07/07/95 v0.96 ■- Can now have unlimited # of conferences. Conference data ~~~~~~~~~~~~~~ is kept in 'CONFS.DAT' instead of loaded into memory. Unlimited Confs - Added <J> key at the conference menu to Join or Jump to a conference #. For those BBS's with LOTS of confs. ■- When adopting files you can use a 3rd date type for upload date: <G> = Get FILE_ID.DIZ's date. - Added <CTRL+D> key in file dir to tag all files with a date older than date entered. Shell to DOS is now <ALT+X> New Keys - <E> in the archive viewer allows user to edit ZAP FILES list with external text editor. (if defined in PSETUP) - <ALT+1> Compresses tagged file descriptions to 1 line. Searches for the line with version # or disk set #'s - <F7> sets the user-defined BOOMLAB rocessing options. - Display file info now shows more data about file. - Added PFED version # to the main screen. ■- When NUKING files & the DOWNLOAD.TXT is used to search for uploader name or restore credit, upload date must agree with DOWNLOAD.TXT date to use info. Prevents using data from a earlier upload of same file. (Babyvet) ■- CRCTEST.BAT didn't support .RAR - Fixed. (Mr. Humble) - Fixed some help menu bugs, added to run BOOMLAB help. - In some enviroments when adopting files the <F> key (use file date) didn't work, SHOULD now work correctly. - Fix some problems using <CTRL+S> key (save & continue) while in file dir. It errored or might add old descs. - DOWNLOAD COUNTER was adding blank lines to 1 line descs. - Fixed nasty bug where if BOOMLAB Fails a PCB Mail ATTACHed file and you were using FILESYS.PPE = PCBoard Locked up. 06/21/95 v0.95 ■- Added a online help system for PFED & BOOMLAB. All docs ~~~~~~~~~~~~~~ have been re-done and they actually may be of some use now ;) Press F1, it will either display the help menu ONLINE HELP or section dealing with area you are in. If in a section you can do <M> for help menu. You can also do PFED ? or BOOMLAB ? from DOS to access the help menu. Both setup programs now have help support. ■- Added DIR SHRINKING. This option compresses file descs for for multi-disk sets in a DIR. All descs will be reduced to only 1 line, the last file will contain the full desc. DIR SHRINKING Shrinking can be done from the DOS command line or from in PFED. From the file area menu do <CTRL+S> for the highlighted area. From inside the file directory do <ALT+S> for the tagged files. From command line use the switch 'SHRINK' as in 'PFED SHRINK'. (Mr.Bill) Example: DISK1.ZIP - THIS IS DISK [1/3] - DISK2.ZIP - THIS IS DISK [2/3] - DISK3.ZIP - THIS IS DISK [3/3] - This is a example of the DIR shrinker. Shows only last description of a set. Files: 4, New: 06/13/95, Old: 06/13/95 Uploaded by: Gene Layton ■- Added <CTRL+C> - adjusts upper/lower case of all tagged Adjust CASE file descs. It converts case to 1)Proper Case, 2)lower case, or 3)UPPER CASE. - <ALT+X> in the file directory now Shells to DOS. ■- When using 'Get Virus Descs' key <ALT+V> long virus names are now word-wrapped. (Misfit) - When adding file's description as a FILE_ID.DIZ if it already contained a DIZ, file date will be preserved. - Multiple CD-ROM's slowed the free space check, PFED now won't check for free space on CDROM drives. (Mr.Bill) - PCBoard allows use of "..\" as the PCB main dir directory. Caused PFED to bomb. PFED replaces it with path to PCBOARD.DAT path entered in the setup. (Andrew H.) - Using <F2> in 'Expert' moves screwed everything - Removed. ■- If file fails integrity check, then it will not be DUPE CHECKED. (if enabled) So if another uploader uploads a good copy it will not fail DUPE CHECK. (Doyen) - Sometimes only got partial virus name using F-PROT -Fixed - Compressing uncompressed .EXT's was case-sensitive - Fixed. (Keith Polson) 06/13/95 v0.94 ■- GROUP NUKE/BONUS: After entering info for the 1st tagged ~~~~~~~~~~~~~~ file PFED now prompts 'SAME INPUT FOR ALL TAGGED FILES Group NUKE (Y/n)?' So you no longer have to re-enter the same information for a group of tagged files. (Stratocaster) ■- Added new key in file dir: <CTRL+H> adds tagged files to Create HS\LINK an output list. It includes path & filename. Can then filelist be used for HS\LINK upload filelist or whatever. ■- ARCHIVE VIEWER: Added support for .RAR archive format. Add files to - Added new <F> key in archive viewer which adds highlighted Protected list file to the new protected file list. ■- Added a SCREENS.ZIP to archive for people who are having Opening Screen problems with the starting PFED Screens. Erase files Fix? with *.SCR and unzip the SCREENS.ZIP to PFED dir. ■- When re-processing files in PFED it now maintains the 'Times Downloaded:' information & adds it to the new desc. - Get Virus Info <ALT+V>: F-PROT scanner didn't work if virus file wasn't compressed - Fixed. (Falcon) It also didn't work at all if normal virus scanning wasn't on. - If moving files and it's aborted <Esc>, PFED now returns to same position in dir instead of at the top of dir. - Add GIF res key '=' didn't work if 1st file in dir - Fixed. .RAR Support ■- BOOMLAB v.62 - Added support for .RAR archive format. - If passthru feature is enabled the original date of the Passthru date FILE_ID.DIZ will now be maintained. Requires file Fix PASSTHRU.EXE to be in the same dir as the BOOMLAB.CFG. - [PCB ONLY] Added new option: Delete files without Delete Files descriptions (Y/N). If enabled all uploaded files without descs without descriptions either manually entered or not containing a description file will be deleted. - If using 'LOCAL' switch - FAILED MOVES & DELETES will prompt "Confirm <Y/N>" if local confirm is enabled. - LCASE 'file_id.diz' might be deleted as random ad -Fixed. - Updated TBSCAN command line in BOOMSCAN.BAT. (Stratocaster) - BSETUP now checks if virus scanner program is correct. - Fixed some duplicate BOOMLAB transaction log entries. Somebody released a bogus & virus infected version of PFED_093.ZIP this is the real one. The other was dated 04/24/95. 05/28/95 v0.93 ■- Instead of only allowing you to define the color code ~~~~~~~~~~~~~~ on the 'Times Downloaded:' text line you can define the complete string, good for you foreigners. (STORM POSSE) - New max # of confs is lowered to 575, due to memory probs. - If BBS name had a comma in it would error when PFED ran. - If using the 'BOOMER's Archive Manager' it added extra Public/Private dirs like PCBoard - Fixed (Doc Skull) - When Cloning file desc's it incremented 9/10 to 1/10 not 10/10, also 0/10 didn't increment - Fixed (Doc Skull) ■- BOOMLAB v.61 - Got many reports about ERROR #54 while ERROR #54 Fix it tries to ZAP random BBS ads, I believe it's fixed now. & ZAP fixes - BOOMLAB wasn't ZAPPING files if file date was 00-00-80 - If random BBS ad contained ASC char 255 it wouldn't delete. - Added new option, 'List of files never to be ZAPPED' List of files (BSETUP pg #1) Sometimes during a random BBS ad text to never delete search a file such as a Group's .NFO file is ZAPPED. To prevent this add it to this list. One entry per line. - When ZIPing uncompressed files, new filename was not found in PCBoard and was left offline- Fixed. It also now won't try compressing uncompressed files if ATTACHED to PCB mail. ■- BOOMLAB v.60 - Added ability to add 'Pass-Thru' text to FILE_ID.DIZ Ex: 'File passed through MY LAME BBS!' All BOOMLAB macros are supported. I don't want to promote Pass-Thru text use of this I think it's stupid but I keep getting asked for it. If you re-process your files a lot locally you should put this text or part of it in the 'STRIPDIZ' file so you won't get multiple pass-thru lines - Understand? - Added BOOMLAB option: 'Uncompressed extensions to compress' Compress files add any uncompressed extensions you would like compressed to ZIP. Enter .EXT's (include period) Ex: .COM.EXE.TXT - Added support for Ansicheck Ansi Bomb checker (ACHKDIR) It's VERY slow and gives a lot of false possible ansi bombs but It will do till I find a better one. (Misfit) - If virus scan result was 'NO FILES!' the FILESYS.PPE considered the file to have failed - Fixed (Fiat) 04/24/95 v0.92 ■- Added boolean operands: & (AND) and | (OR) for use when ~~~~~~~~~~~~~~ doing complex text searches. Do not use both together. Ex: HSLINK & PROTOCOL & BETA would find any files that Complex Scans contained ALL three text strings. Ex: PFED | BOOMLAB | BOOMER would find any files that contained any of the three text strings. - When viewing logs or scans it displays % viewed at top. ■- The <O> key now updates ON-LINE/OFF-LINE status of all Update Status files in a DIR. If files are restored it will restore of all files their dates, if files aren't ON-LINE they will be changed to 'OFF-LINE' Filesize's will also be updated. (Scufi) - When using <F>ile's creation date on local uploads it errored out if using Netware 4.0+ - Fixed? (Mark M.) - When deleting files & leaving a 0-Byte file it will now show 'OFF-LINE' instead of 'DELETED' (Stargrove) ■- Download Counter didn't count files if filename was less than 12 bytes in length (Only since last version) -Fixed. ■- When uncompressing files to floppies it will now prompt 'Insert blank diskette into drive A:/B: for each disk. ■- BOOMLAB v0.59 - Added 2 new options: - Added support for PCBoard PSA 'PCBALIAS', in the setup Support for (Page #2, option #16) enter the path to the USERS file. PCBALIAS Ex: D:\PCB\MAIN\ to enable. If a user has entered their alias, this name will be used for 'uploaded by' name. Strip MCI Codes Not available on local uploads. - Added BOOMLAB option to 'Strip MCI | color codes <Y/N>?' 04/07/95 v0.91 - The DOWNLOAD COUNTER will only read the PCB Transfer log ~~~~~~~~~~~~~~ once so should now be noticeably faster now. Fixed a bug with Private dirs in Download Counter. - When using the 'F'- Import master FILES.BBS the complete path & filename must be entered to allow filenames that are not 'FILES.BBS' Ex: DIRS.LST. Also added support for another master list type format. (Frosty) - Can now define what ANSi viewer to use in PSETUP.EXE, The provided MV.EXE has some limitations. (SkyGod) - Added switch 'MONO' to force MONO video mode. (R. Murray) - When adopting files using '+' PFED now gives option to use <C>urrent, or <F>ile's creation date for upload date. - Can change extract options when using <X> in arc viewer. - Searching some Random BBS ads caused Fatal Error #6-Fixed. - Text '^^^' detected as ASC Graphics, and not word-wrapped. 03/23/95 v0.90 ■- Previous maximum # of conferences was 200, you can now ~~~~~~~~~~~~~~ have up to 999. Let me know on the support board if Now supports there are any problems. PSETUP.EXE will create a file 999 conferences named UPLDIR.LST Do NOT Delete. Also in the PSETUP.EXE 'Alternate Starting Conference' has been removed. ■- When ncompressing files proggy will now let you edit the extract options before proceeding, or just press ncompressing <Enter>. The -d option (maintain directory structure Files option) was missing - Fixed. Also when extracting to floppy it will add the volume -$ switch. (Highbinder) ■- 'Get Description' setting in user defineable processing User-defined options should always be on, so i removed it from the test options options screen. You should redo your settings. changes It also did not add the 'uploaded by'. (Mr. Humble) ■- BOOMLAB v0.58 - Deleting BBS Ads is now slightly faster. - If '-*-' was added to ZAPFILES list BOOMLAB deleted all volume labels and subdirs - Fixed. (Wildchild) Replacing - Added option 'Text to replace in DIZ's' this works like DIZ Text the DIZ Lines Remover but only removes the exact text string with nothing, it does not remove the whole line. 03/12/95 v0.89 ■- Added support for System Express or System-X BBS v1.00ß ~~~~~~~~~~~~~~ Not tested by anyone, hopefully it works ok. Tell your Added System-X System-X friends to try it out. support ■- Got TOO many requests on what to do and not to do when processing files locally. So now there's a configuration screen ('B' from in the directory) to do it your way. User-defined So that when prompted "Test All Files <Y/n/g/p>" test options Y = Completely test ==> P = User defined options only. G = Get FILE_ID.DIZ only. The key will use your desired options. ■- If using the e<X>pert file moving mode. When entering the file area # to move files to, you can press F2 and select Expert Move area from the directory list. What is expert mode? improvements Instead of having to tag files and move them to each dir use expert mode to define where it is to be moved to, then do a <M>ove and they will all be move to defined areas. It also now prompts confirm Y/N when exiting expert mode so tags won't be lost. Fixed a few bugs. ■- Some paths didn't show correctly in Dupe Checker - Fixed. - Fixed some getting file date bugs related to 4DOS (Scufi) ■- BOOMLAB v0.57 - When BOOMLAB exits it will now display and/or log whether the file PASSED or FAILED BOOMLAB. - [PCB] Added support for an external 'PCBFAIL.MSG' file displayed in PCBoard when a file fails. Did it quickly BOOMLAB v.57 if you can do better, send it to me ;) - [PCB] If running other tests before BOOMLAB, and it fails (PCBFAIL.TXT already exists) BOOMLAB will fail the file. - If running BSETUP only and F2 (Edit Text) is pressed it now allows the user to define a text editor. (Mr.Humble) - LOCAL mode: if WARNING message is added it's also added to all files that follow it - Flag reset (MISFIT) - Virus scan setup in BSETUP was screwed-Fixed. (Mr. Humble) - BBS Ads have not been deleted since Comm routines were added (v.53) - Fixed (Mr. Humble) 03/03/05 v0.88 ■- Press <L> in the file directory and any files marked ~~~~~~~~~~~~~~ OFF-LINE that have been restored will have their date fields changed back to their original file dates. Online status - <O> key now marks all missing files as 'OFF-LINE' & 0-byte files - <CTRL+O> now tags all missing files. - <CTRL+D> now tags all files marked as DELETED/OFF-LINE. - When deleting actual files in subdirs, PFED will prompt 'Create 0-Byte file' keeps file from being re-uploaded. - Online status for 0-Byte file showed 'Yes' now shows '(0)' because it's there, but only a 0-byte file. (Mr. Humble) ■- New setting in PSETUP- Operating system: <M>=MSDOS, <N>=NDOS, <4>=4DOS. If set, the adopt files option use <C>urrent or <F>ile date will now work for 4DOS. (Scufi) ■- Couldn't move files to a conf # over #99 - Fixed (Stickman) ■- Added support for importing a 4th FILES.BBS format. Where the description starts at space 36. (Skip Evans) ■- Could view inside the archive viewer more than once, exited with ILLEGAL FUNCTION - Fixed. (SkyGod ... ) ■- BOOMLAB v0.55b- If using multiple virus scanners they can now be defined in the BSETUP program. - If file failed a test & both LOG & Move FAILED file to path were enabled program errored & halted -Fixed. (MADMAN T) - If ZIP Comment file didn't exist it would error out. 02/22/95 v0.87 ■- PSETUP Would error out - Fixed (Fiat/D.Labadie/R.Rabbit) ~~~~~~~~~~~~~~ - When using F2 in BSETUP, selected editor not used. (Fiat) ■- Fixed a bug with viewing embedded files over a meg. ■- Master List would only write one dir if using '%' headers BUGS! Fixed: Previous header wasn't being closed (DR. DAVIS) BUGS! ■- ARJ READ-ONLY FILES....Found a problem with ARJ files, BUGS! Unlike ZIP's ARJ files don't mask the read-only attribute BOOMLAB then couldn't delete the files or remove the subdir, and it will soon fill up your hard-drive! Did a quick fix using 'ATTRIB -R *.*' if read-only is detected. - Added 'DISK.ID' as the third description file to scan for. - If random ads is enabled any text file containing the macro @BEGIN_FILE_ID.DIZ/@END_FILE_ID.DIZ is detected it can be us as a file desc, used in Amiga circles. (Tosh10) - BOOMLAB could lock up when stripping @ codes. 02/19/95 v0.86 ■- When adopting files using <W>, PFED will now prompt to ~~~~~~~~~~~~~~ 'Use <C>urrent or <F>ile date' <C> uses current date Upload date for upload date, <F> uses file's creation date. (Scufi) ■- Setup program is now 2 programs PSETUP.EXE for PFED, BSETUP.EXE for BOOMLAB. So I can release an update of BOOMLAB without PSETUP screwing up the BOOMLAB.CFG ■- Archive Viewer: Added PAK and ZIP/LHArc's SFX support & fixed bug that wouldn't allow viewing embedded archives. ■- Press <Esc> during <F>ind text to abort it. (Highbinder) ■- Added <F1> Editing keys help screen in Description Editing mode. Sometimes you had to press F1 many times -Fixed. ■- BOOMLAB v0.54: Added new option, 'Display progress to BBS user' if enabled it will display to user what is COM Routines being done so they don't think the system is locked. for online Graphics match the PCBPASS.TXT screen. (PCBUSER.ANS) callers BOOMCOM.EXE & PCBUSER.ANS must be in same path as config. - Updated FILESYS.PPE to handle Dupe Check failures, config New FILESYS.PPE must be completely re-entered as structure has changed. - Added support for a 'Privileged User' list. Uploader still Privileged gets credit for a FAILED upload and file gets posted. User List - Added 2 options to fine-tune LOCAL processing: 'Duplicate Check Local uploads (Y/N)' 'Confirm FAILED files move or delete (Y/N)' (R. Murray) - Added support for old .PAK format. - Added support for PKZIP's & LHarc's Self-Extracting format. - Embedded archives were not being CRC or Virus scanned! - If ad is in Zapfiles list it will also now delete ad even if in Embedded dir. Ex: ASS.AD Kills STUPID/ASS.AD BUGS... - If FILE_ID.DIZ is not found BOOMLAB errored out with a ERROR #52 - Fixed. (Stratocaster/Doyen/Dragon Master) - Testing an embedded archive that was in a recursive path caused a ERROR #76 - Fixed (Highbinder) - Increased stack memory to help prevent lockups. - If run from a root dir ex: C:\ it would error 75 - Fixed. - Fixed some bugs with External Dupe Checkers. Make sure BOOMDUPE.BAT is replaced with one in this version. 02/12/95 v0.85 ■- FILE DESCRIPTION EDITING: ~~~~~~~~~~~~~~ - <ENTER> on the last line of desc now adds a new line. - Finally Added desc editing keys for block deletes, block moves, cutting and pasting, etc... / <ALT+L> - Mark line. To define a block, mark Mark areas / the beginning and ending of area. Delete & Move <ALT+U> - Unmark all lines. \ <ALT+D> - Delete marked area. (remains in buffer) \ <ALT+M> - Move marked area to cursor location. <ALT+A> - Add/Append marked area to buffer. Will / be added to whatever is already in buffer. / <ALT+C> - Copy marked area to buffer. Can then Copy/Paste keys use paste (ALT+P) to make a copy or copy (Buffer) \ it to other file descriptions. \ <ALT+X> - Clear Buffer. <ALT+P> - Paste (Insert) whatever's in buffer to any description at the cursor location. ■- Create 0 byte file when NUKING didn't work - Fixed. (HDC) ■- <Esc> in Archive/DOS viewers now exits. (popular demand) - <Tab> in the Archive viewer moves screen 20 spcs to the right, needed to view long ZIP embedded paths. - Couldn't delete files in embedded paths - fixed. ■- BOOMLAB v0.52 - Added support for External Dupe Checkers ZDCS and ULP both by Stacey Smith. They're fast and will External Dupe check contents of upload to detect if someone is trying Checkers to upload a renamed file. Select system to use and path ULP & ZDCS to it on Pg #1 of BOOMLAB setup. If using ULP create a ULP config file named BOOMULP.CFG and turn off all other options. See BOOMLAB.DOC for more (Mr. Humble/Jerry S) Random keyword - Fixed major bug with deleting random ads by text keywords. Search fixed Also if any files in an archive contained ASCII char 255 it screwed up the whole process - Fixed. - 'EXCLUDE' file dates list was optimized & much faster. - Was cutting off DIZ macros in ZIP comments - Fixed. - If text to replace 'Carrier Lost ...' is used, the string ∞ Description in FILE_ID.DIZ ∞ will also be replaced. - THUNDERBYTE v6.32 - 'AF' switch removed because it caused the program to halt with a warning box. (great for BBS's) Author says you can't have a non-exe infected without infecting a exe. Untrue if in an archive, oh well. (Fiat) 02/06/95 v0.84 ■- DOWNLOAD.TXT (PCB) - When using <G>et DIZ or rocess ~~~~~~~~~~~~~~ file and uploader is not known PFED will automatically More search the transfer log if 'Add Uploaded By' is enabled. DOWNLOAD.TXT - Local uploads are added to the DOWNLOAD.TXT file. Support - When adding files and using '<?> Scan DOWNLOAD.TXT for uploader' the date will be used for upload date if found. - Fixed BUG where if uploader is not found it will NOT use previous uploader found. (Ace of Spades) ■- Filesize now updated after archive viewing. (Ace of Spades) - <Esc> at 'Move Files to Conference #' returns to DIR list. ■- BOOMLAB v0.51 - ADDED 5 OPTIONS (See BOOMLAB.DOC for more) ∙ 'Maximum # of desc lines'. It will properly adjust length BOOMLAB v.51 of DIZ if too long, won't cut off uploader or DESCADD.TXT ∙ 'Extentions to bypass scan', for BBS's with virus areas, 5 new options any listed extensions (Ex: .VIR) won't be scanned. (Bubba) GIFTEST/GIFLITE ∙ Strip PCBoard/Wildcat @ color codes from DIZ <Y/N> supported ∙ Compress GIF using GIFLITE <Y/N> -Requires GIFLITE.EXE (JS) ∙ Process GIF using GIFTEST <Y/N> -Requires GIFTEST.EXE (JS) ■- LOCAL PCB MODE - Can now use wildcards for archive name. LOCAL Wildcards Ex: D:\PFED LOCAL D:\INCOMING\*.* [PCB DIR] [MOVE TO...] (File Tossing) So it can now be used as a basic FILE TOSSER for Echo's etc... See BOOMLAB.DOC for more info. (Mr. Humble) ■- BUGS: Deleting random BBS ads by text search didn't work, found text had to be all CAPS!-Fixed (Highbinder/Bionic) - If DIZ came from a console & normal BBS Ad text was added, BOOMLAB didn't detect and convert to IBM format - Fixed. - Fixed PCB problem with 1st line using Word-Wrapping. 01/26/95 v0.83 ■- Re-did setup to add 8 new BOOMLAB features/settings. ~~~~~~~~~~~~~~ See 'BOOMLAB.DOC' for more details. ∙ Strip ALL Blank Lines <Y/N>? (Mr. Humble) ∙ Enable 'smart' DIZ text word-wrapping <Y/N>? ∙ Strip High-Bit ASC characters <Y/N>? BOOMLAB v.50 ∙ Replace PCB's "Carrier Lost ... " text. ∙ Archive extensions to reject. ∙ List of filenames to blacklist. ∙ Test archive integrity <Y/N>? - now optional ∙ Strip -AV Protection for ZIPs <Y/N>? - now optional - If LOG gets over 150k it will start a new LOG file. Old LOG is renamed OLDLOG.# (# = Node #) - BBS ADS - Wildcards are now accepted in the 'ZAPFILES' list. Ex: *.NFO and DEATH*.* - USE CAUTION!!! - PCB BOOMLAB - If DIZ/SDI had lines longer than 45 spaces it caused blank lines or lines overlapping in PCBoard causing an mess. Word-wrapping was added to handle this but if not enabled, lines will be hacked off. (Jerry S) - Repacker setup has changed, list all format extensions to repack (Ex: .ARJ.LZH ) or for all use ALL. - Age Test '|TA' macro now shows 'OFF' if age check disabled. - Now will add archive comments to .ARJ files if enabled. 01/21/95 v0.82 ■- Added a couple new keys when in the file directory: ~~~~~~~~~~~~~~ ∙ <C> key = Copy tagged files to a path. Copies ONLY COPY tagged the file to the desired path, no descriptions. (Rifleman) ∙ <J> key = Change conference. Returns to opening menu. ■- When adding specific files <+> and path is different from Import files that of current DIR's path, PFED now prompts 'MOVE file(s) to DIR's path?'. 'Yes' = move file(s) to DIR's path. ∙ Fixed some BOOMLAB bugs when using <+> add files key. Date Format ■- Date's in the Directory listing and when editing are now in DIR List shown in your country's correct date format. (Bionic) ■- Fixed major MOVE BUG I've heard about for quite awhile. PFED sometimes didn't allow files to be moved. Caused by flag getting set with 'No Files tagged' message - Fixed. BUGS... ∙ When deleting and all prompts are 'N' it exits. (Bionic) ∙ When sorting and default was not set it would display as '32' (space) and error if not changed - Fixed. ∙ ncompressing files to path didn't work if extension wasn't ZIP/ARC/LZH/ARJ (Ex: .VIR) now checks file header. ∙ DOWNLOAD COUNTER - Fixed some display & misc bugs. . FILES.BBS Importing - Strips comment lines if possible. Wrong file dates for NON-USA countries. (A. Marcedone) Always prompted to overwrite file even if empty file. ■- BOOMLAB v.48a - Added a command line mode for PCB BOOMLAB. LOCAL PCB Can be used from DOS or other programs like file tossers. Mode Ex: BOOMLAB D:\PFED LOCAL FILE.ZIP D:\PCB\GEN\PUBLIC See BOOMLAB.DOC for more information. (Mr. Humble) ∙ When virus scanning <E>xe's, program might lock up when extracting files if command line was too long - Fixed. Also added .BIN and .SYS files as EXE's to be scanned. ∙ Added new macro: '|VA' = lists all virus scanners used & ver #'s. '|VP' & '|VV' macros now only shows 1st scanner. ∙ Sometimes a .ZIP would show version # as 78.7 or whatever. Upper byte was supposed to be for Host System (OS) so now BOOMLAB reports PKZIP v78.7 as PKZIP v1.9 under UNIX. ∙ Uploader name not added if file wasn't an archive - Fixed. 01/14/95 v0.81 ■- Added BOOMSORT program in package to handle HUGE and ~~~~~~~~~~~~~~ multiple key sorts. Sorting by #4 'Date descending' Sort HUGE Dirs now sorts date descending and filename ascending. Hopefully can now sort dirs under OS/2 etc... ■- When trying to View, Get DIZ, or Process a file not online it will show "*ERROR*" instead of attempting any action as some people said this would lock up program - Fixed. ■- ARCHIVE VIEWER - .ARC files are now supported for viewing. ∙ Viewing files in recursive subdirs created and left behind those dirs after viewing was finished - Fixed. ■- DUPE REMOVER FIXES - Global <T> didn't tag ALL but first, When displaying over 18 dupes it locked up prog - Fixed. ∙ Thanks to BOOMSORT it should now work with larger BBS's. ■- LAST CALLERS - for PCB 15.2 didn't work - Fixed (2n10s) ■- BOOMLAB v.47 - Added a log for BOOMLAB. It will log all BOOMLAB Log test results, errors, file info and any BBS Ads deleted. Turn 'LOG file processing <Y/N>' in setup to 'Y'. Logs will be named BOOMLOG.#, where # is the node # (0=Local) ∙ Some European users said they can't the date check to Date Style work correctly under OS/2 and other environments. There »EUROS READ!« is now a manual date format selection in the setup, all NON-USA users make sure this is set. (DRAGON MASTER) Added .ARC ∙ PkWare's old PKARC (.ARC) archives are now supported by support BOOMLAB. Program PKPAK.EXE/PKUNPAK.EXE must be in path. ∙ When deleting random BBS ads by text keywords: files w/o extensions and files in subdirs weren't being scanned. Files weren't being deleted after being read - Fixed. Bug Fixes... ∙ Screwed up scanning files from embedded .ZIPs in v.46 and not all embedded archives were checked - Fixed. Embedded ARJ's with Ext's like .A01 are now checked. ∙ If Add files to archive list didn't exist it was reported that it might add any file, now can't - Fixed (Indigo) 01/04/95 v0.80 ■- Fixed some minor bugs. ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ■- BOOMLAB v.46 - there is now a third way to ZAP BBS Ads, define a text list in setup under 'text to ZAP random BBS ads. Create a filename such as BBSADTXT, included in this ZIP, with text to search for. One entry per line. ZAP files by BOOMLAB extracts all text files and search each for any text search! matching text! This should be lethal to those random BBS adders, but does take a little longer to process. Currently only ZIP's are supported. (Rifleman) ∙ Added support for AVSCAN v1.91 (c)H+BEDV Datentechnik GmbH A nice scanner from Germany available on CompuServe. ∙ If ZIP or embedded ZIP was part of a backup set it would fail (NO FILES), it now won't try to process the file but adds warning to desc 'WARNING! - BACKUP ZIP NOT TESTED!'. ∙ PKZIP version would sometimes show 1.0 when it was created using 2.0, the local header didnt have enough info, so now it reads the end central dir record-technical crap ;) ∙ If virus scan detects only a possible virus, BLAB now indicates it 'Might be' whatever named virus. 12/29/94 v0.79 ■- Added more CD-ROM support: From the DIR selection screen ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ <G> will import a FILES.BBS for only the highlighted area. Helps if re-doing or there's no master FILES.BBS. More CD-ROM ∙ When importing a FILES.BBS and the output DIR file support already exists it will now prompt before overwriting. ∙ Added support for another FILES.BBS description format: FILENAME.ZIP [0] DESCRIPTION GOES HERE ■- BUG: Dates such as 99-99-99 caused fatal error 'Illegal Function' when writing out a new PCB Index file. DIR from that point on would be lost! - Fixed. Bugs fixed ■- BUG: Clone full file desc (CTRL+K) didn't work - Fixed. ∙ When cloning (K,CTRL+K) cursor now advances to next file. ■- ARC VIEWER - Couldn't delete some volume labels - Fixed. ■- BOOMLAB v.45 - Added macros |tc = results of archive test, |ta = results of age test, |tv = results of virus scan. |dw = DIZ text without any PCB color codes. ∙ MACROS: Added the ability to format ouput of all macros. Format output Add the number in brackets [n] after the macro code. of macros ex: |fn[13] Additionally with the |DZ (DIZ) macro you can specify how many lines to display ex: |DZ[45,10] = Display 10 lines of the DIZ desc formatted to 45 spaces. ∙ Designed a new PCBPASS.MSG taking advantage of new stuff. ∙ Some internal archives over 1 meg werent being processed. Boomlab bugs ∙ If no files to virus scan it won't scan, saving time. ∙ Fixed some 'bugs' dealing with getting virus name. ∙ Now detects a scheme people use to hide BBS Ads - Fixed. ∙ If ZIP or internal ZIP was part of a backup set PKUNZIP prompts 'Insert last disk' causing BLAB to stall - Fixed. 12/21/94 v0.78 ■- Added <F> 'Import CD-ROM areas using FILES.BBS to the ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ Dir selection screen. This reads the master FILES.BBS in the CD-ROM's root directory, automatically adds the Import FILES.BBS file area and imports the file descs. Can Handle 5 (CD-ROM) different types of FILES.BBS. (See PFED.DOC for more) ■- CONF EDIT: Inserting a File Area didn't work - fixed. ■- DOS/ARC VIEWER - Total Kb of tagged files is shown at top. ■- When selecting a dir with 0 files it fatal errored - fixed. ■- BOOMLAB v.44 - Archive Integrity Testing (CRC) is now done internally by BOOMLAB. If using standalone for CRC Testing PCBOARD, modify and use the updated PCBTEST.BAT included. Changed ∙ When internal archives are extracted for virus scanning they are also now CRC test. (Third Son/Wildchild) ∙ Added Setup setting 'Add Blank line between descs' this will add a blank line to end of all text for each file. ∙ If BBS Ad file was a volume label and over 8 bytes it wasn't deleted. (Ex: MISSING_VOL) Also after first CRC match found, BOOMLAB didn't look for any other matches. ∙ When using multiple virus scanners and last scanner passed file but others failed it didn't fail file. (Phreak Creep) ∙ If a file failed a local test and had no .DIZ it wouldn't display the skull desc, just 1st line - fixed. (Copyright) ∙ Added 2 macros |AT (Archive type), |AI (Archiver Info) ∙ Fixed a LOT of little bugs in BOOMLAB 12/16/94 v0.77 ■- MEMORY: Can now have an unlimited # of files. (BayBeVet) ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ∙ Freed up 18k more memory, may help with external progs. ∙ Some users got 'OUT OF STRING MEMORY ERROR', and other problems when entering a conf with many dirs, re-did routines and should now handle those huge conf's dirs. ■- DIR MENU now displays dir #'s > than 99. (Craig Salmond) ■- CONF EDIT: If subdir doesn't exist, now asks create? (Y/N). ■- EXPERT MOVES: After moving files, PFED didn't properly clear all dir/conf move to flags from the Dir - fixed. ∙ PSETUP: Pressing <F10> on the BBS Config Path caused error. ∙ PFEDNUKE.PPE Mail showed 'DELETED' for date - Fixed. ■- BOOMLAB v.43 - Added FILESYS.PPE (Standalone PCB only), a PPE that will automate the handling of failed files. New FILESYS.PPE It can write E-Mail to the sysop, user, delete file, and nuke any failed file. (See enclosed FILESYS.ZIP) ∙ Added new macro |NL = add new line. Helps if your trying to fit a lot in 'Upload by' string. (Diabolical Joker) ∙ BUG: Sometimes NON-USA date formats didn't work with PCB Standalone ver. - it couldn't find BOOMSYS.DAT. (ToSH10) 12/09/94 v0.76 ■- Added a key for virus collectors <ALT + V> uses BOOMLAB's ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ defined scanners to get the virus name as description for all tagged files. Ex: CASCADE.1701.S virus or variant Get Virus Name If multiple scanners are defined it will use 1st virus as Description found. If none found then description won't be changed. ∙ To define your own desc output create a text file named 'VIRUSADD.TXT' using macro codes. A new macro '|VN' for virus name was added for this purpose. (See BOOMLAB.DOC) ■- Added BOOMLAB Setup option to virus scan using Heuristic Analysis if available (ThunderByte, F-Prot). Use with Heuristic caution as Heuristic scans can find unknown virii but Virus Scans will give more false readings. It requires more memory so it may not be available in local mode. (Phreak Creep) ∙ NOTE! - Make sure to unzip PFEDTEST.BAT and BOOMSCAN.BAT ---READ!---> from this version or BOOMLAB will not work properly. ∙ BOOMLAB & Archive Viewer previously used file extensions to determine type of archive it was. They now check file headers to see if it might be a ZIP, ARJ or LZH. (RAGE) Both also now support self-extracting ZIP's. BOOMLAB v.42 ∙ NON-ARCHIVES (COM's/EXE's) previously were virus scanned in the PFEDTEST.BAT file using only SCAN. They now are full scanned using BOOMLAB's defined virus scanners. ∙ If 'PATH TO MOVE BAD FILES' is defined it should now work. ∙ If using more than 1 virus scanner '|VV' won't display. & Fixed bug with macros that sometimes chopped last char. ■- When in e<X>pert file moving mode and tagging a file, Expert Moves default conf#, area# is now whatever last entered (2n10s) ∙ When a file has been tagged in expert mode, it now shows where it is to be moved in the date field. Ex: MV:1,4 12/05/94 v0.75 ■- New way to attack BBS Ads...In Archive Viewer, <C> adds ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ CRC Value to ZAP List. Then if any CRC matches are found by BOOMLAB they will be zapped. This only gets those who ZAP files by rename Ad files all the time, but it won't get those ads CRC Value that use macros to add filename, size, upload date etc. In the archive viewer CRC Test is now CTRL + C was <C>. ■- Added CTRL+C, does CRC test on highlighted file in a DIR. CRC Testing ∙ Changed Compact Desc to ALT + C (Running out of keys) ■- DOWNLOAD COUNTER now uses PCB index, says 'Skipped' if no DL's from a DIR. Overall should now be a little faster. ■- BOOMLAB v.41 - ZAP files by CRC-32 value. Use Archive Viewer (above) or manually add CRC:######## to ZAP list. ∙ Macros show 'NONE' for NFO & DIZ if they were included BOOMLAB v.41 in the date EXCLUDE file - fixed. (Phreak Creep) ∙ When extracting FILE_ID.DIZ's, usually in LHA's, desc is extracted all as 1 line. Files have NON-IBM linefeeds so it will now detect and correct. (BAZZA/Time Walker) 11/27/94 v0.74 ■- BOOMLAB v.40 - Added 5 different ways to age test archive: ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ NEW - Use Newest file date. [default] OLD - Use Oldest file date. (Shouldn't use this) Age Checking DIZ - Use date of FILE_ID.DIZ. If none use Newest. AVG - Use Average of file dates. MOST - Passes only if MOST of the files pass age test. ■- There's now a UPDATE.BAT file to correctly update new PFED versions. Unzip the PFED_### zip to a disk or temp UPDATE.BAT dir and type UPDATE followed by location of PFED. Ex: UPDATE D:\PFED This updates all necessary files without overwritting any data files you've modified (Rifleman) More Areas ■- Can now have unlimited # of areas in a conference. Only limited by how much memory you have. (Jose Romero) Create 0-Byte ■- When nuking files it prompts "Create a 0-Byte file", Yes keeps file from being UL again, now optional. (Mr. Bill) ■- Added a new key for a highlighted file: CTRL+F will PKZIPFIX key PKZIPFIX & replace the highlighted file. (This will fix files screwed by NETWARE NLM prob that doubles filesize) ■- PFED now informs you when adding duplicate line to the DIZ Misc... Strip file <CTRL+B>, also doesnt advance line. (Rifleman) - Filesize now correctly displayed if >3 megs (Time Walker) - Sort by Desc fixed for 4000+ files (Falcon) - In PCB if # of confs was set higher than actually used it could cause PFED not to run - Fixed (Ernie Stefan) 11/17/94 v0.73 ■- Added a new way to move files, <X> will toggle a eXpert ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ file moving mode. In this mode, after tagging a file, PFED will prompt for conf # and area # to move files to. Expert File And then when <M>ove is initiated the files will be Moving Mode moved to all the various areas. Saves a lot of time but you'll have to know all the area #'s. (The Master) ∙ DOS Shell has been changed from <X> to CTRL-X. ■- For Command Line options (LIST, SORT, TIMESDL) you can now specify the areas in a conference to perform the Can Specify command on. Add the area #'s in parenthesis after conf Areas on the #. Ex: PFED TIMESDL 0,1(1-20,22),5-15 In this example Command Line PFED will only process areas 1 to 20 and 22 in conf #1. As shown in the example commas and hyphens can now be used between conf & area #'s ##,##-## (previously had to use a space & list ALL confs) NOTE: For TriBBS use just the area #'s Ex: (1,3-5) (Mr.Bill & BaybeVet) ■- When the full desc toggle is on all @X codes are stripped. 11/05/94 v0.72 ■- TRiBBS - When adding file descs using PFED, many descs ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ wouldn't list correctly in the BBS - Fixed. To fix a dir make at least one change and save. (Kurt Samuel) ■- BOOMLAB: Added a repacker to convert ARJ or LHZ or BOTH to ZIP format. NOTE: Internal Paths are NOT supported. ■- Added <L> key in dir, it changes the status of all offline files in the dir to 'OFF-LINE'. ■- When using command line option TIMESDL, PFED didn't update PCB index files as it should, slowing down scans. ■- When toggling screen info (Tab), filesize is shown at top. ■- BUGS: When adopting all files, PFED prompted Process All? <Y,n,z>, the Z shoulda been a G - Get DIZ ONLY. ∙ After adding files PFED cleared tags but not totals. ∙ In 43 & 50 line screen modes full desc editor had bugs. ∙ Dupe Checker sometimes didn't work, error #19 - fixed ∙ Early v.71's command line options didnt work - fixed 10/31/94 v0.71 ≈ Trick or Treat version ;) ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ■- RE-DID DUPE CHECKER: Now scans using .IDX files, (PCB) and then subdir files. Doing both muck quicker. Improved And only reads dir once (CD-ROMS wont be worn out) Dupe Checker It was also leaving out Upload & Private dirs. ■- NEW DUPE REMOVER: after scanning for dupes PFED will prompt <V>iew, rint or Dupe <R>emover. The dupe remover displays each dupe and the DIR's or subdir's it was found in. Select dupe to delete by selecting the DUPE REMOVER corresponding #. <A>=Selects all listed dupes. GLOBAL KEYS include: <D>=Tag all dupes in a specified dir/subdir. <T>=Tag all dupes but the first file listed. Press <Esc> when done. It will then remove all tagged dupes: NOTE: This should be done with users offline. ■- You can now define the default # screen line mode: 25, 43 (EGA) or 50 (VGA) line modes in PSETUP. The opening 43 & 50 line screen will be in 25 line mode everything else will be Screen Modes in the screen mode selected. Additionally while in a area DIR you can use keys 2, 4 & 5 to toggle between 25, 43, and 50 line screen modes. ■- Under Pg # it now shows file #'s ex: 1 oƒ 300 (CanopeneR) ■- Added BOOMLAB macro '|vv' shows version of virus scanner used EX: |vp |vv scan results: |vr ThunderByte 6.24 scan results: PASSED ∙ Date Checks for .ARJ's & .LZH's didnt work! - fixed BOOMLAB fixes ∙ Didn't extract .ARJ files or internal .ARJ files for Virus Scanning, extracted to defualt path - fixed ∙ Wouldn't add files to an .ARJ - fixed (Falcon) ∙ Wouldn't extract internal archives during virus scans if different kind of archive - fixed ■- BUGS: Delete key sometimes stopped working - fixed. ∙ <F5> key in quick edit mode didn't clone desc - fixed. ∙ When using <V>iew & file is not in dir it could lock up some systems, now checks FAT before trying. (Falcon) 10/25/94 v0.70 ■- Added support for TriBBS by TriSoft. (v5.02 - 01/18/94) ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ Hopefully it will work with any newer versions. ■- Added DUPE CHECKER, <D> from the conference or dir menu. It will scan all BBS subdirectories for dupe files. Will add other kinds of checks in later versions. ■- When exiting an area, PFED now asks 'EXIT AREA - Are you sure?', got tired of exiting accidentally. This & most other Y/N questions now have a YES/NO toggle prompt. ■- Check out the screen info toggle key <Tab> or <T>. 'Online' tells if file is in dir, (Much faster now) & displays the FULL description of the HIGHLIGHTED file in the right portion of the screen. Cool!... Example: Filename Date Online Description oƒ PFED_066.ZIP PFED_065.ZIP │ 10-25-94 │ No │ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ >PFED_066.ZIP │ 10-26-94 │ Yes │ ■ ▀▄▀▄█▄█▌▌ -:- PFED v0.66 -:- ▐▐█▄█▄▀▄ ▀ ■ PFED_067.ZIP │ 10-27-94 │ Yes │ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ PFED_068.ZIP │ 10-28-94 │ Yes │ Deluxe PCBoard/Express BBS File Area Mgr. PFED_069.ZIP │ 10-29-94 │ Yes │ Move, delete, edit, & sort files quickly. Archive viewer, desc & DIZ editing, file NUKER, Local and PCB Standalone local ul processor (BOOMLAB), log viewers, command line MASTER LIST & DOWNLOAD COUNTER too! * 43/50 lines now supported * ■ ▀▄█▄▀█▄██▀███████████████████▄█▀▄█▄▀▄ ▀ ■∙ ■- Couldn't adopt files with Novell DOS, this caused me to redo how PFED reads the dir's FAT table, should now work w/Novell DOS & adopts files faster too. (Techno Rave) ■- When putting descs into archive as FILE_ID.DIZ (CTRL+P) it now supports .LHA's and .ARJ's, not just .ZIP's. ■- Converted opening screens to faster format, make sure unzip all .SCR files from the PFED_###.ZIP file. ■- Setup now asks for the BBS main path, instead of copying a new config file each time to the PFED dir. 10/21/94 v0.65 ■- Can now have conferences #0-200. (Apocalypse) ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ■- When deleting file but leaving desc, PFED now displays "DELETED" in date field. (PRIME EVEAL/Time Walker) ∙ Also added a new tagging key: CTRL+O = tag all files marked as 'DELETED' or 'OFF-LINE' so the dir desc's can be batch deleted or moved. ■- Added new macro code |nu = name of uploader without any color codes for use in misc. text files. (ToSH10) ■- TIMESDL (Download Counter) fixes, additions: ∙ Can add PCB color code (@X) to 'Times downloaded' text line. Define on line #11 on pg#1 in PSETUP. (BayBeVet) ∙ BUG: If DOWNLOAD.TXT file had not changed, PFED would error. Now reports "NO DOWNLOADS TO LOG!" (Apocalypse) ∙ BUG: Was adding a blank line to some files every time TIMESDL was used - fixed. Extra Blank lines removed. ■- Fixed a bug with the new .IDX support - it didn't always put newest file date in header. Also when moving files to another dir, it didn't update that dir's index. ■- BUGS: If ULBY.DAT had an extra line, it would cause BOOMLAB to error out with 'Input past end'- fixed - Fixed some display bugs when using 'Z', 'U' scans. 10/18/94 v0.64 ■- PFED now writes PCB's index file (.IDX) when writing ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ out a file dir. This was to enable adding a full dupe checker (next version) and little did i know initially, PCB needs it to make new upload and zippy scans faster. ■- New command line feature: PFED SORT, sorts file dirs. PFED can sort all confs, or specified confs. There is also a 'UPLOAD' switch will sort only UPLOAD dirs. PFED SORT (sort all dirs of all confs) PFED SORT 0 2 (sort all dirs in confs 0 & 2) PFED SORT UPLOADS (sort all upload dirs in all confs) PFED SORT 1 UPLOADS (sort upload dir only in conf #1) ■─ When editing BOOMLAB options in PSETUP, F2 edits high- lighted file. If a text editor is defined in External Utils it will run that else tries PCBEDIT or EDIT. » ASC Char 11 is now stripped from any incoming .DIZ text. ■- BUGS: When using 'W' or '+' (adopt files), PFED wasn't adding local uploader name. - Fixed. 10/15/94 v0.63 ■- BOOMLAB v0.35 IMPROVEMENTS ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ────────────────────────── ∙ Got tired of no color so added some pretty colors. ;) ∙ Added BOOMLAB support for country codes, it now shows Now Supports & calculates correctly for European (DD-MM-YYYY) and Country codes Japanese (YYYY-MM-DD) date formats. (E-Buzz/ToSH10) ∙ You can pass the files through more than just one of the listed scanners if you enter '+' for scanner #. Create a file named SCANNERS.CFG and list the scanners you want Use Multiple to use in the format: Scanner #, Full Path & scanner Virus Scanners Ex: 5,C:\FPROT\F-PROT 3,C:\TB\TBSCAN 2,C:\MCAFEE\SCAN BOOMLAB displays only the 1st virus found. (ToSH10) ∙ Standalone PCB version now reads PCBOARD.SYS file and Can now add adds uploader name if set to 'Y' in BOOMLAB setup Uploader in (Add 'Uploaded by' to PCB UL's). In PCBSETUP under BOOMLAB for PCB G)Config Options, B)File Transfers the "Include 'Uploaded by' in Desc" must then be set to 'N'. ∙ Added ULBY.DAT support, a file generated by the PPE's Now Supports ULBY.PPE or UNAME.PPE. In the BOOMLAB setup enter ONLY ULBY.DAT the path where it is located and it will convert the uploader name to a specialized signature. (ToSH10) Macros in ∙ The 'Uploaded by' text string can now support macros: 'Uploaded by' Ex: Uploaded [|ut] by: |nm text Uploaded [12:10] by: BOOMER ∙ Added new macro code |nm = Name of uploader. ∙ Uploader name is now converted to upper/lower case. Ex: THE BOOMER is now converted to The Boomer. ■- Added JPG (Compressed GIF) external viewer in setup. JPG Viewer It automatically runs when doing <V>iew in DOS & Archive viewers and the extension is .JPG (Royce) ∙ DOS Viewer: Pressing enter on "." didn't exit to root. ■- Sort by Desc didn't work right...Hopefully fixed (Falcon) 10/09/94 v0.62 ■- MAJOR BUG: When trying to adopt files in an empty dir ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ it would lock up system - fixed. ■- Added F-PROT as a supported virus scanner. ■- When adopting files for PCB, & using 'A' for ALL files, and using '?' for uploader name it will scan the xfers log for each uploader not just the 1st. (Wildchild) ■- Free Space Screen <H> now shows expanded memory [Mem:380k/8232k] 1st #=conventional, 2nd #=expanded. Added Cursor keys: Home,End,Page Up & Page Down. 10/02/94 v0.61 ■- Worked on the Function keys in full EDIT <E> mode: ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ∙ Added 'F4' = Loads text file. This will append whatever file entered to the end of a description. Can be used for such things as logo's/groups etc... ∙ Improved 'F5' Clone file desc. Now clones entire description of preceding file. (For big sets) ∙ Fixed 'F6' = adds GIFSpec to file description bugs. ■- When adopting files (W or +) for PCB, you can enter a '?' for the uploader's name and PFED will scan the transfer log for who uploaded it. (Wildchild) ■- Had added a command line Download Counter in v.57, you can now specify which conferences to use it with by adding the conf # to the command line Ex: >PFED TIMESDL 1 3 61 =Process confs #1,3 & 61 ONLY >PFED TIMESDL =Process All Confs (Mr.Bill) ∙ You can also do this with Master List >PFED LIST 1 3 61 and it will produce master list for only those listed. ■- When file is nuked, desc now shows *NUKED* for filesize. ■- BUGS: Increased Stack Memory alloted to try and fix any crashes while adopting lot's of files. (Sente) ∙ If DIZ Text remover had a blank line then all lines would be stripped, also CTRL+B can now not add blank lines. 09/27/94 v0.60 ■- Added 43 & 50 line mode support to PFED!. You can run ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ PFEDVGA.BAT, if you have a VGA card it will give you a 50 line mode, if EGA then 43 line mode. Made the Graphics program (BMODE) external to save about 20k. PFEDVGA.BAT > BMODE 50 PFED 43 & 50 line BMODE 25 modes for PFED ∙ Another way of achieving 43/50 line mode is to load ANSI.SYS in the CONFIG.SYS file, this allows use of the lines command. (DEVICE=C:\DOS\ANSI.SYS) SAMPLE BATCH > MODE CON LINES=43 PFED MODE CON LINES=25 Don't use BMODE if ANSI.SYS is installed and if you have memory problems then you can't use these modes. ■- BUGS: Fixed Fatal Error #19 when trying to view some logs. ∙ PFED didn't ask 'Create Master List?' when using 'M' key. 09/25/94 v0.58 ■- In EDIT mode added CTRL+B, this adds line to the DIZ ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ text remover file. (Question #2 in BOOMLAB setup) This This allows for quick adding of those hard to copy BBS ads in the .DIZ files. (Rifleman, Wildchild) ■- Added new batch key, CTRL+A will add the tagged file's description as a FILE_ID.DIZ into the archive. (Rifleman) ■- When giving a bonus (CTRL+B) or give warning (CTRL+W) if uploader not found, PFED can scan transfer log (Wildchild) ■- Anytime local BOOMLAB is run the filesize is now updated. ■- BUGS: DIZ text remover only worked if uppercase - fixed ∙ Some very big drives would cause PFED to error out or at the least show incorrect HD space info - fixed. Also added 'CD' to free space screen if a CDROM. ∙ Exploding windows on/off flag didn't save (Wildchild) ∙ Sort by description didn't work with large dirs (Falcon) 09/16/94 v0.57 ■- Added sort dir by description. (FALCON) ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ■- PCB BUG: If node numbers weren't used in PCBSETUP then logs A,B,C & L didn't work and BOOMLAB PCB Standalone didn't work - Fixed (FALCON/Charlie Echo) ■- New Download Counter, a command line feature for batch events >PFED TIMESDL This will add "Times Downloaded:" Download to the file desc's. This should be run during a Counter nightly batch event as no callers should be online. If run from batch event it must be run from PFED dir. Ex: CD\PFED PFED TIMESDL 09/11/94 v0.56 ■- Improved the File Nuker for PCB: 1)If uploader name ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ not found in the description the nuker will prompt "Scan transfer log (Y/n)" - It will attempt to find Nuker: Scans who uploaded the file and may take a few seconds transfer log depending on the log size. 2)The nuker will also for UL'er & prompt "Restore Downloader's Credit (Y/n)", it will can restore find all those who downloaded the file and restore DL'er credit. credit for the download! (Homie D. Clown) ■- Added Option in BOOMLAB setup to select 1 of 4 virus scanners. 1-SCAN, 2-New SCAN (2.1.0), 3-ThunderByte, BOOMLAB v0.26 4-Dr.Solomon's. Next enter the full path & program Virus Scanner name. This virus scanner is for BOOMLAB only. Improvements ∙ If a virus is found, BOOMLAB will read the scanner's & text file log and show the virus name found in the description. translation ∙ Added in the BOOMLAB setup the option to 'translate' a text file. Macro codes in the file are translated and the file is renamed with a .CMT extension. File can be added to the add files list (Homie D. Clown) ■- When adopting files in a directory that the dir text file is also kept then it will be skipped. Improved LHA ■- Archive Viewer - BUG: If viewing a file then functions. adding a file it wouldn't re-display dir - fixed. ∙ Added /m (answer yes) switch to any LHA function. ∙ Added /n1 (supress output) to add/delete LHA functions. ■- Fixed a bug with adding GIF Resolution to end of desc. 09/05/94 v0.55 ■- PROBLEM: If there were PCB color codes in the ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ description, PFED would only allows 45 spaces and some text may be lost. PFED now allows longer lines IF color codes detected, maximum to 57 spaces. ■- When NUKING a file and deleting/nuking the actual file the file size is now displayed as '0'. ∙ When searching for uploader now looks for "BY: " ■- Added |df macro to BOOMLAB, prints φ DIZ if .DIZ found. ■- Fixed a bug with line #'s in DIZ's, using <G> key. ∙ Fixed a bug with deleting files <V>iewed that already existed in \PFED dir. (MV.COM doesn't permit paths) ∙ Fixed a bug with @X Codes in the <T>ype command. 09/02/94 v0.54 ■- Added a <L>ist function to use an external LIST ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ program, such as D. Buerg's LIST, to view text files. Works in DOS & Archive viewers. Define external lister in PSETUP under 'LIST UTIL' ∙ Added <C>RC test archive to archive viewer. ■- BOOMLAB BUGS - Now Handles Amiga files correctly. ∙ Removed add blank line from .53 as it was incorrectly inserted between description and uploaded by. ∙ Added some error detection for creating output text. 08/29/94 v0.53 ■- Added CTRL+K Klone FULL file description of ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ previous description. <K> still gets only 1st line. ∙ When using <K>lone & CTRL+K, the klone feature now increment sets if structured as any of the following: 1/3 1\3 1 / 3 1 \ 3 1 OF 3 ■- BUG: Couldn't view .ARJ's inside archives - fixed. ∙ BUG: Fixed some bugs dealing with <T>ype command. ∙ BUG: Would sometimes get Error #3's exiting from conference menu - fixed ∙ BUG: Boomlab for PCB didn't add a blank line if 'Y'. 08/25/94 v0.52 ■- Added a new safety feature so that a dir can be ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ recovered if for some reason (out of HD space etc) the dir you were working on was lost. Before Auto-backup of PFED writes out the new dir it copies the old dir to a working dir to backup file. Ex: GAMES ==> GAMES.BAK If GAMES is prevent loss lost you can then copy GAMES.BAK over. This does slow down the writing process but you can turn it off in the PSETUP (Question #10) if desired. ■- When viewing .PCB graphic files using <V>iew or PCB Codes <T>ype the @X codes are now translated into colors. Re-did how the <T>ype function works. 08/23/94 v0.51 ■- Added new command 'U' uncompresses all tagged files ≈≈≈≈≈≈≈≈≈≈≈≈≈≈ to a specified dir. For unzipping big disk sets. ■- BOOMLAB v.22: For PCB Standalone BOOMLAB, now supports 'TEST' as a mode. Its displays the archive CRC test results for .ZIP/.ARJ/.LZH's (Mr.Bill) PCBTEST.BAT Example Setup: IF "%2" == "TEST" goto TEST_FILE :TEST_FILE D:\PFED\BOOMLAB D:\PFED\ TEST %1 %3 %PCBDIR% ^^^^ ∙ If archive was a .LZH or internal archive was .LZH, then internal archive wasn't checked properly - fixed. ∙ On .LZH's the # of files was off by one and now it skips date compressed in old/newest date check. ∙ Some Zip comments caused BOOMLAB to halt, it now reports and then continues. (CHR 26) ∙ Skips filesize = 0 files when determining newest date. ∙ Shows Virus Scanner as McAfee's even if not scanned.